Cisco VG202 Yazılım Yapılandırma Kılavuzu - Sayfa 21

Ağ Geçidi Cisco VG202 için çevrimiçi göz atın veya pdf Yazılım Yapılandırma Kılavuzu indirin. Cisco VG202 50 sayfaları. Voice gateways
Ayrıca Cisco VG202 için: Donanım Kurulum Kılavuzu (50 sayfalar), Manuel (10 sayfalar), Donanım Kurulum Kılavuzu (48 sayfalar), Hızlı Başlangıç Kılavuzu (19 sayfalar)

Configuring with the Command-Line Interface

This chapter describes how to use the Cisco IOS software command-line interface (CLI) to configure

basic Cisco voice gateway (VG) functionality.

This chapter presents the following major topics:

•

Follow the procedures in this chapter to configure the Cisco VG manually or, if you wish, to change the

configuration after you have run the setup command facility (see the

Facility" section on page

This chapter does not describe every configuration possible—only a small portion of the most commonly

used configuration procedures. For advanced configuration topics, see the Cisco IOS configuration

guide and command reference publications. See the

Service Request" section on page

If you skipped

Note

VG, return to

important information that you need for configuring your Cisco VG.

Note

Cisco VG202 and Cisco VG204 voice gateways are fixed voice gateways and do not support interface

cards.

One of the first configuration tasks is to configure the hostname and set an encrypted password.

Configuring a hostname allows you to distinguish multiple Cisco VGs and routers from each other.

Setting an encrypted password allows you to prevent unauthorized configuration changes.

A hostname can be specified only when the VG has a DNS server available for hostname resolution.

Note

Perform the following steps to configure the hostname and password.

OL-16191-01

Configuring the Hostname and Password, page 3-1

Configuring Fast Ethernet Interfaces, page 3-3

Saving Configuration Changes, page 3-5

2-1).

Chapter 2, "Using the setup Command Facility,"

Chapter 2, "Using the setup Command Facility"

Cisco VG202 and Cisco VG204 Voice Gateways Software Configuration Guide

C H A P T E R

"Obtaining Documentation and Submitting a

-vi.

"Using the setup Command

and you have never configured a Cisco

and read it now. The chapter contains

3-1