Epson LQ-570e Ürün Bilgi Kılavuzu - Sayfa 10

Yazıcı Aksesuarları Epson LQ-570e için çevrimiçi göz atın veya pdf Ürün Bilgi Kılavuzu indirin. Epson LQ-570e 18 sayfaları. Epson serial impact dot matrix printers
Ayrıca Epson LQ-570e için: Ürün Bilgi Kılavuzu (8 sayfalar), Manuel (12 sayfalar), Hızlı Referans Kılavuzu (15 sayfalar), Teknik Özellikler (2 sayfalar), Montaj Kılavuzu (8 sayfalar), Ürün Destek Bülteni (16 sayfalar), Referans Kılavuzu (34 sayfalar)

EPSON LQ-570e

The paper thickness lever allows the printer to accommodate

various thicknesses of paper. You can select one of 8 positions

identified by the scale next to the lever.

Use the following table to set the paper thickness lever to match

the thickness of your paper.

10 - EPSON LQ-570e

You can use carbonless multipart forms of up to 5 parts (the

original plus up to 4 copies). Make sure you set the paper

thickness lever to the proper position based on the number of

layers in your form.

For best results with multipart forms, select a straight or almost

straight paper path. It is best to load multipart forms using the

front or bottom slot and the pull tractor.

Except for setting the paper thickness lever, load multipart

forms the same way you load ordinary continuous paper.

When printing, use only labels that are mounted on continuous

backing sheets with sprocket holes for a tractor feeder. Do not

try to print on single sheets because the printer may not

properly feed labels on a shiny backing sheet.

Continuous paper with labels requires a straight or almost

straight paper path. Be sure to use the tractor in the pull

position and load the labels in the front or bottom.

You load labels the same way you load ordinary continuous

paper, except you must set the paper thickness lever to 2 before

printing.

4/00