Epson R1400 Montaj Talimatları Kılavuzu - Sayfa 14

Yazıcı Aksesuarları Epson R1400 için çevrimiçi göz atın veya pdf Montaj Talimatları Kılavuzu indirin. Epson R1400 21 sayfaları. Eco-flo continuous ink system

Sayfayı Yazdır

Step 14 Installing the Central Tube Support Bracket & Aligning the Tubes

The Tube Support Bracket has Self Adhesive Strips on it. Use an alcohol or cleaning solution and clean the top of

the printer housing where the Tube Support Bracket is going to be attached, see Fig.36. Then make sure the area is

dry before proceeding.

Remove the adhesive backing off both ends. Carefully install and align the Tube Support Bracket in its proper

location 47mm from the right edge of the recess, as shown in Fig.36 or the 3

square from the right as illustrated.

47mm

Fig.35

Fig.36

When you have aligned and fixed the Tube Support Bracket in its position as illustrated in Fig.37 below. Please

ensure that the Central Tube Support Bracket, the top and bottom are firmly stuck down to the printer body. The

tubes can now be inserted through the available opening in the middle of the bracket by squeezing the

tubes as indicated in Fig.38 below.

Fig.37

Fig.38