Argos Technologies EVac Operatör El Kitabı - Sayfa 15

Laboratuvar Ekipmanları Argos Technologies EVac için çevrimiçi göz atın veya pdf Operatör El Kitabı indirin. Argos Technologies EVac 20 sayfaları.

Maintenance, Care and Safety Precautions

The EVac™ does not require any special servicing or maintenance. If a reduction in

suction power occurs, it may be caused by blockages in the tube and/or filter on the pump

side. This may be remedied by exchanging the affected tube and/or filter. When replacing

filter, remember that writing on filter should point away from device.

The EVac™ may be cleaned with most common laboratory disinfectants, including

isopropanol.

NOTE

When using level detection, always ensure that the contact pins on bottle lid are kept

clean and dry.

DANGER

Always unplug the EVac™ from power supply before cleaning. Never use caustic

solutions (such as nitro thinners) to clean the EVac™.

The EVac™ bottle, lids and tubes may be autoclaved to a maximum temperature of

121° C (249.8° F).

Refer to the autoclave manufacturer's guide for correct sterilization of liquids

and volumes.

To prevent damage, always disconnect quick connectors prior to autoclaving.

Loosely screw lid onto bottle during autoclave process to prevent heat from

STOP

deforming bottle lid.

The EVac™ Instrument, Mains Adapter, and Sensor Cable are not autoclavable.

To prevent generation and/or aspiration of corrosive vapors, use only non-caustic

STOP

chlorine-free agents for chemical sterilization.

Argos Technologies EVac™ — Operator's Manual