Motorola CLP107e Kullanıcı Kılavuzu - Sayfa 29

İki Yönlü Telsiz Motorola CLP107e için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Motorola CLP107e 42 sayfaları.

Figure 11: Programming the Radio through a Multi-Unit Charger

2 Set the cable switch to analog.

3 After the radio is connected, open the CPS and select Read on the toolbar to get the radio

profile.

You can change the general, audio, menu, channels, scan list, customized PL/DPL settings and

select frequencies and PL/DPL codes on each channel.

4 To save the settings, select Write to radio on the toolbar.

NOTICE: For more information on the CPS, see Help menu in the CPS.

4.2

Factory Default Settings

Your radio is programmed at the factory to the following settings.

Table 8: CLP107e

Channel Number

Frequency Settings

(MHz)

464.55

467.925

467.85

467.875

461.0625

461.1125

Chapter 4: Radio Programming through CPS

Code Value (Hz)

67.0

MN007419A01-AA

Bandwidth (kHz)

12.5