Motorola MBP26 Kullanıcı Kılavuzu - Sayfa 10

Bebek Monitörü Motorola MBP26 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Motorola MBP26 27 sayfaları. Digital video baby monitor
Ayrıca Motorola MBP26 için: Hızlı Başlangıç Kılavuzu (2 sayfalar), Kullanıcı Kılavuzu (27 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar)

4. If there is no connection or you are out of range, the video display

will go off and the symbol

the unit will beep every 9 seconds. (If the unit is on scan

1 ?

the

symbol displays.) Move the parent unit closer to the baby

until the link is re-established.

5. Press and hold the

bar scrolls fully across , to turn OFF the parent unit.

NOTE

The battery icon

is low, and it gives a beep every 16 seconds. The battery needs to be

recharged. battery pack takes about 16 hours to charge fully.

When charging

If the parent unit is turned OFF, when the adapter is plugged in, it

displays a "mains plug" icon briefly, then a large battery icon with

internal segments cycling for 60 seconds, before the display goes

blank, but the unit continues to charge. The Blue LED at top left

corner lights up to indicate adapter is plugged in.

If the parent unit is turned ON, when the adapter is plugged in, the

battery icon in the screen's top right corner will show that the battery

is charging by cycling the internal segments. The segments stop

cycling when the battery is fully charge. The Blue LED at top left

corner lights up to indicate adapter is plugged in.

Getting Started

POWER ON/OFF button, until the progress

turns RED and flashes to indicate that the battery

will flash on the LCD display, and

Getting Started