Toshiba 22EL833B Digital Series Kullanıcı El Kitabı - Sayfa 14

TV Toshiba 22EL833B Digital Series için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Toshiba 22EL833B Digital Series 44 sayfaları. Digital series

Sayfayı Yazdır

A wide variety of external equipment can be connected via the sockets located on the side and back of the

television. Whilst all the necessary adjustments and controls for the television are made using the remote

control, the buttons on the left side of the television may be used for some functions.

Switching on

If the standby LED is unlit, check that the mains plug is con-

nected to the power and press the

the television to switch the television on. Then the LED lights

up in green. If the picture does not appear, press

remote control; it may take a few moments.

To put the television into Standby, press

control. To view the television, press

may take a few seconds to appear.

Note: The active Standby LED may appear for a few moments

when the TV is switched off.

For energy saving:

Turning the television off at its mains supply, or un-plugging

it, will cut energy use to nearly zero for all televisions. This

is recommended when the television is not being used for a

long time, e.g. when on holiday.

Reducing the brightness of the screen will reduce energy use.

Energy efﬁ ciency cuts energy consumption and thus saves

money by reducing electricity bills.

NOTE: Putting the television into standby mode, will reduce

energy consumption, but will still draw some power.

A01_MB60_[GB]_(IB_INTERNET)_DVB-TC_(CT90326)_10071224_10071226.indd 13

Controlling the TV

Press the MENU button on the remote control to see the

button on the left side of

menus.

The main menu appears as a group of icons each for a menu

on the

option. Press the

OK button.

on the remote

In sub menu screen mode the menu appears as a list. Press

again. The picture

the

To use the options press the

control to move up and down through them and OK,

buttons to select the required choice. Follow the on screen

instructions. The functions of each menu are described in

detail throughout the manual.

Using the Controls and Connections on the TV

Using the control buttons on the side of the TV:

• To alter the volume press + or -. If the volume does not

change, press P/V-AV button twice and press + or -

again.

• To alter the programme position press P/V-AV button once

and then press + or - button.

• To select an external input, press and hold P/V-AV button

until "Sources list" is displayed. To select an external input,

press P/V-AV repeatedly until the appropriate input source

is selected.

NOTE: The USB socket has limited functionality, and Toshiba

can take no responsibility for damage to other connected

equipment.

Please always refer to the owner's manual of the equipment

to be connected for full details.

- 13 -

Using the Remote Control

button to select a topic, and press

button to select a topic, and press OK button.

and

buttons on the remote

02.06.2011 20:56:04