Epson PowerLite Cinema 500 Kullanım Kılavuzu - Sayfa 15

Yazılım Epson PowerLite Cinema 500 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Epson PowerLite Cinema 500 36 sayfaları. Release of emp ns connection for windows & mac upgrade from v2.50 to v2.51
Ayrıca Epson PowerLite Cinema 500 için: Kullanıcı Kılavuzu (42 sayfalar), Broşür (2 sayfalar), Kullanım Kılavuzu (47 sayfalar), Parça Listesi (1 sayfalar), Manuel (13 sayfalar), Kullanıcı Kılavuzu (1 sayfalar), Ürün Destek Bülteni (25 sayfalar), Ürün Destek Bülteni (22 sayfalar), Ürün Destek Bülteni (28 sayfalar), Ürün Destek Bülteni (41 sayfalar), Ürün Destek Bülteni (15 sayfalar), Ürün Destek Bülteni (22 sayfalar)

Sayfayı Yazdır
Epson PowerLite Cinema 500 Kullanım Kılavuzu
Registering and deleting projectors for monitoring
PROCEDURE
1
Right-click in "Grouping view" and select "New" -
"Group".
The following window will be displayed.
Make the necessary settings while referring to the table below.
• If "Detail list view" is displayed, select "New" - "Group" from the
"Edit" menu.
Group name
Enter the name of the group(s) to be displayed in
"Grouping view" or "Detail list view".
Up to a maximum of 32 bytes can be entered.
A space cannot be used as the first character.
Display icon
Select the icon(s) to be displayed in "Grouping view"
or "Detail list view".
Parent group
This selects the parent group. If no groups have been
created, this cannot be selected.
Monitor
Select this to monitor all projectors that have been
registered in the group. If this is not selected, the
settings made when the individual projectors were
registered will be used.
It cannot be set when creating a new group.
TIP
You can also carry out this operation by selecting "Group" from
"New" in the "Edit" menu.
2
After entering the details, click [Register] to start the
registration. When the message is displayed, click
[OK].
The icon(s) of the projector(s) you registered will be displayed
in "Grouping view" or "Detail list view".
3
Right-click the projector icon(s) to register to the
group you have created in "Grouping view" or "Detail
list view", and select "Edit".
TIP
You can also carry out this operation by selecting "Edit" from the
"Edit" menu.
In the "Edit projector" window, select the group name
4
to use for registering in "Parent group" and then click
[Change].
The status of the group registration will be displayed as an icon
in "Grouping view" or "Detail list view".
TIP
The registration details can also be checked using "Projector list" in
the "View" menu.
14