Whirlpool 3ET16NK Kullanım ve Bakım Kılavuzu - Sayfa 6
Buzdolabı Whirlpool 3ET16NK için çevrimiçi göz atın veya pdf Kullanım ve Bakım Kılavuzu indirin. Whirlpool 3ET16NK 26 sayfaları. No-frost refrigerator-freezer
Sayfayı Yazdır
Before Using Your
Refrigerator
In This Section
Page
Page
Cleaning
your refrigerator
. . . . . . . . . . . . . . . . . 5
Installing
it properly
. . . . . ..*................... 6
Plugging
it in . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Leveling
it . . . . . . . . . ..*............*...................
6
It is important to prepare your refrigerator for use. This section tells you how to clean it,
connect it to a power source, install it and level it.
Cleaning
your refrigerator
Removing
packaging
materials
NOTE: Do not remove any permanent
Remove tape and any inside labels (except
instruction labels inside your refrigerator. DO
the model and serial number label) before
not remove the Tech Sheet fastened under
using the refrigerator.
the refrigerator at the front.
To remove any remaining
glue:
Cleaning
it before
use
l
Rub briskly with thumb to make a ball, then
After removing all packaging materials,
remove.
clean your refrigerator before using it, if
OR
necessary. See cleaning instructions on
l
Soak area with liquid hand-dishwashing
pages 15-l 6.
detergent before removing glue as de-
scribed above. Do not use sharp instru-
ments, rubbing alcohol, flammable fluids or
abrasive cleaners. These can damage the
material. See "Important Safety Instruc-
tions" on page 3.
Plugging
it in
Recommended
Grounding
Method
A 115 Volt, 60 Hz (Plug 1) or 220/240 Volt,
50 Hz (Plug 2), AC only 15 or 20 ampere
fused and properly grounded electrical
supply is required. It is recommended
that a
separate circuit serving only this appliance
be provided. Use a receptacle which cannot
be turned off with a switch or pull chain. Do
not use an extension cord.
Plug 1
Plug 2
5