Xerox XC 356 Kullanıcı Kılavuzu - Sayfa 20

Fotokopi Makinesi Xerox XC 356 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Xerox XC 356 50 sayfaları.

B o

Making Copies on the XC355 and XC356

7. To make from 1 to 9 copies, press the

Copy Quantity button to set the number of

coores.

8. The copy quantity display normally reads

1, and will increase by one number each

time the Copy Quantity button is pressed.

9. To make more than 9 copies, press the

Copy Quantity button until C is displayed

(after 9). The copier will now make up to

20 copies. lf there are less than 20 sheets

of paper in the paper tray, the copier will

make copies until the tray is empty and the

letter P appears in the copy quantity

display.

10.Press the Start button when the Ready

indicator lights.

. When making the first copies after

turning the power switch on, copying will

stan a few seconds after pressing the

Stafi button.

. To stop copying, press the Stop Clear

button.

Approximately 1 minute after the last

copy is made, the exposure setting will

return to the auto mode, and the copy

quantity will return to 1.

Approximately 90 seconds after the last

copy is made the copier enters the auto

power saver mode and the Ready

indicator starts flashing. Copying is

possible in the Auto Power Saver Mode,

but the first copy may take a few

seconds longer than usual.

E o

1 5