Xerox Fiery X12 Manuel Kullanım - Sayfa 6

Yazıcı Aksesuarları Xerox Fiery X12 için çevrimiçi göz atın veya pdf Manuel Kullanım indirin. Xerox Fiery X12 12 sayfaları. Controller interface kit

Sayfayı Yazdır
Xerox Fiery X12 Manuel Kullanım
T
O ACCESS THE
2
Using the Fiery X12/Fiery X40 Advanced Controller Interface Kit
Procedures
Before you replace the BIOS chip you need to access the Service menu in order to begin
installation.
S
ERVICE MENU FROM THE
1. Select Shut Down and then Reboot System from the Functions menu.
2. While the Fiery X12/Fiery X40 is running the startup diagnostics, hold down the fourth
line selection button on the Control Panel to access the Service menu.
If you do not press the fourth line selection button before the end of the diagnostics, the
Fiery X12/Fiery X40 continues startup and you must restart the system and try again.
3. At the Service menu select Install Option.
Install Software
Restore Backup
Install Option
Start System
Service
C
P
ONTROL
ANEL
Hold down line selection button to
access Service menu
Select