Xerox 721 Yayın Notu - Sayfa 16

Yazılım Xerox 721 için çevrimiçi göz atın veya pdf Yayın Notu indirin. Xerox 721 23 sayfaları. Software tools
Ayrıca Xerox 721 için: Operatör El Kitabı (11 sayfalar), Kurulum Kılavuzu (20 sayfalar), Yayın Notu (8 sayfalar), Müşteri Eğitim Kılavuzu (50 sayfalar)

pages ahead of the printer causing a queue that is larger than the system can hold. The solution

is to wait for several of the pages to complete printing before copying any additional documents.

8.3.9 Recalling sets

When a set is recalled, the scanner UI settings are not set to reflect their state for the last page

scaled, but are in a "neutral" state to prevent unintentional overriding of setting for the set. If a

setting (like scale, page size, etc) is changed it will affect the entire document set.

When scanning/copying documents with very low contrast (like poor blue line or sepia

documents) with dynamic background removal set to OFF can cause the system to threshold the

document and produce a very washed out document. Enabling background removal will actually

remove less of the background in this case.

8.4.1 Manual feed media source will be ignored when used with the

Accxes Client Tools' page composition feature.

Go to Accxes Client Tools > Job Option tab > Composition tab > Select Overlay Images > Media

Source drop down menu. Although "Manual Feed" is listed as a choice of media source for page

composition jobs, the print job will be treated as if AUTO media source was selected. If an

appropriate roll of media is available, it will be printed on that media; otherwise, the job will query

until the correct roll media is installed. In addition, other Media Source selections will be treated

as AUTO if an appropriate roll of media is available in a different roll.

8.5.1 Printer Queue – Main WebPMT Screen

The FreeFlow Accxes Controller supports a maximum of 120 active printer jobs in the queue and

8 active copy jobs. If subsequent jobs are sent before the 128th prints, ports will refuse

connections and there can be scan errors; when there are fewer jobs in the queue, the jobs can

then be resubmitted or scanned. Additionally, completed jobs will be removed from the queue

display immediately to make room for the newly submitted print jobs. To avoid these issues,

keep the number of active print jobs to under the 128 limit.

NOTE: More than 128 files can be sent from the Document Submit Tool as one print job, but all of

the files in the print job must have printed before sending subsequent jobs, or the jobs will be

refused.

Zum Drucken von Etiketten mit Umlauten DRUCKERVORGABEN > DRUCKER-EINSTELLUNG

> Plot-Etiketten wählen.

Anschließend im Dropdown-Menü für Fonts einen der folgenden Fonts wählen: HP2 Stick Font

Latin - 1 oder HP2 Stick font Latin - 1 – Proportional.

Page 16