Yamaha HTR-5130 Kullanıcı El Kitabı - Sayfa 11
Alıcı Yamaha HTR-5130 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Yamaha HTR-5130 42 sayfaları. Natural sound av receiver
Sayfayı Yazdır
How to Connect:
Connect the SPEAKERS terminals to your speakers with wire of the proper gauge, cut as short as possible. If the connections are
faulty, no sound will be heard from the speakers. Make sure that the polarity of the speaker wires is correct, that is the + and –
markings are observed. If these wires are reversed, the sound will be unnatural and lack bass.
Caution
Do not let the bare speaker wires touch each other or any metal part of this unit. This could damage this unit and/or
speakers.
To connect to the MAIN SPEAKERS terminals
Red: positive (+)
Black: negative (–)
2
1
3
To connect to the REAR and CENTER SPEAKERS
terminals
Red: positive (+)
Black: negative (–)
1
3
2
1
Unscrew the knob.
2
Insert the bare wire.
[Remove approx. 5mm
(1/4") insulation from
the speaker wires.]
3
Tighten the knob and
secure the wire.
1
Press the tab.
2
Insert the bare wire.
[Remove approx. 5mm
(1/4") insulation from
the speaker wires.]
3
Release the tab and
secure the wire.
<U.S.A., Canada, Australia, China and General models
only>
Banana Plug connections are also possible. Simply insert the
Banana Plug connector into the corresponding terminal.
11