ALDI GPMXSZ461 Kullanıcı Kılavuzu - Sayfa 13

Çim Biçme Makinesi ALDI GPMXSZ461 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. ALDI GPMXSZ461 18 sayfaları. 46cm sp petrol lawnmower

ALDI GPMXSZ461 Kullanıcı Kılavuzu
46CM Petrol Lawnmower
Refill with 470ml SAE30 oil or equivalent ie SAE5W/30,
SAE10W/30). When the dipstick is rested on the filler pipe (i.e. not
screwed in place), the oil level must be between the min and
max marks on the dipstick (Fig 8).
See "Filling with Engine Oil''. Do not overfill.
Start the engine and allow it to run briefly.
Stop the engine, wait one minute and check the oil level. Top up
if necessary.
Note! For more information see the Engine Manual.
Blades
For safety reasons you should only ever have your blade
sharpened, balanced and mounted by an authorised service
workshop. For optimum results it is recommended that the blade
should be inspected once a year.
Note! For engine maintenance, see more details in the Engine
Manual.
Note! Before you remove the hybrid collection box, stop the
engine and wait until the blade stops completely.
Note! You will need garden gloves (not provided) and a spanner
wrench to remove the blade.
Note! Always handle the blade with care- sharp edges could
cause injury USE GLOVES.
Renew your metal blade after 50Hrs mowing or 2yrs whichever
25
www.coreservice.co.uk
GB
IRE
Maintenance
AFTER SALES SUPPORT
+44 (0)1904 727501
GB
+353 (0)1 902 2605
IRE
GB
IRE
Maintenance
is sooner regardless of condition.
Note! If the blade is cracked or damaged replace it with a new
one.
Note! Don't hold the blade by hand directly.
Note! Maintain the sharpness of the blade when cutting grass.
If the blade has worn excessively and become pitted and blunt,
it should be replaced or sharpened. The sharpness of the blade
will affect the performance of the lawnmower.
For safety reasons we recommend that the blade only be
changed by someone qualified and authorised to do so.
1. Tip machine backwards .
2. Hold the blade and unscrew the blade bolt counterclockwise
using a spanner wrench. Remove the washer and the blade.
3. Inspect the blade adaptor on any signs of damage.
4. Fit a new blade, locate the blade on the two studs on the
blade flange and then replace the washer and bolts.
5. Check the washer is still slightly domed to keep the pressure
on the bolt to stop it unwinding, keeping the blade firmly
secure. Then replace the washer (right way around!) and
bolts (Fig 16).
6. Make sure the blade is correctly located, and then firmly
tighten the bolt. Do not over tighten.
AFTER SALES SUPPORT
+44 (0)1904 727501
GB
+353 (0)1 902 2605
IRE
46CM Petrol Lawnmower
26
www.coreservice.co.uk