Zanussi 949495305 Kullanıcı Kılavuzu - Sayfa 24

Fırın Zanussi 949495305 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Zanussi 949495305 29 sayfaları.

Sayfayı Yazdır

CATALYTIC FAN COVER

CAUTION! Do not clean the catalytic

surface with oven sprays, abrasive

cleaning agents, soap or other

cleaning agents. This will damage the

catalytic surface.

The fan cover with a catalytic coating is self-

cleaning. It absorbs fat which collects on the walls

while the oven works.

To support the self-cleaning procedure, heat the

empty oven on a regular basis.

1. Remove all the accessories from the oven.

2. Clean the oven floor with warm water and

washing up liquid, then dry it.

3. Set the function

4. Set the oven temperature to 250 °C and let the

oven operate for 1 hour.

Step 1

Press the buttons at the sides of the

door trim (A) on the upper cover and

pull it upwards to remove it.

Step 2

Hold the inner glass B tightly with

both hands and slide it upwards to

remove it from its initial position.

Make sure that you tightly hold glass

B to prevent the glass from falling.

Step 3

Clean the door with a wet sponge

and rub it dry with a soft cloth. Do

not use steel wool, acids or abrasive

cleaning agents because they can

damage the surface.

5. When the oven is cold, clean it with a soft and

wet sponge.

Spots or discolouration of the catalytic surface

have no effect on catalytic properties.

HOW TO REMOVE AND INSTALL: DOOR

The oven door has two glass panels. You can

remove the internal glass panel to clean it.

CAUTION! Do not use the oven

without the glass panels.

The direction in which you open the

door depends on your oven model.

You open the door from the right side

in some models and from the left side

in others.