Zanussi ZDTS300 Kullanıcı Kılavuzu - Sayfa 9

Bulaşık Makinesi Zanussi ZDTS300 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Zanussi ZDTS300 28 sayfaları.

Sayfayı Yazdır

First use

Before using your dishwasher for the first time:

• Ensure that the electrical and water connec-

tions comply with the installation instructions

• Remove all packaging from inside the appli-

ance

• Set the water softener

• Pour 1 litre of water inside the salt container

and then fill with dishwasher salt

• Fill the rinse aid dispenser

When using tablets that integrate rinse aid

and detergent:

there is no need to fill up with rinse aid

– set the water softener

– add special (dishwasher) salt

When using tablets that integrate rinse aid,

detergent, salt function and other additives:

there is no need to fill up with special salt or

rinse aid.

Check whether these detergents are suitable

for your water hardness. Follow the manufac-

turers instructions.

Set the water softener

The dishwasher is equipped with a water

softener designed to remove minerals and salts

from the water supply, which would have a det-

rimental or adverse effect on the operation of

the appliance.

The higher the content of these minerals and

salts, the harder your water is. Water hardness

is measured in equivalent scales, German de-

– Set the water hardness to level 1.

IMPORTANT!

If the drying results are not satisfactory we rec-

ommend that you:

1. Fill up the rinse aid dispenser with rinse aid.

2. Set the rinse aid dosage to position 2.

If you decide in future to use separated deter-

gents, we advise that you:

– Fill up the salt and rinse aid container.

– Adjust the water hardness setting to the

highest level and perform 1 normal washing

programme without loading any dishes.

– Adjust the water hardness setting according

to the hardness of the water in your area.

– Adjust the rinse aid dosage

grees (°dH), French degrees (°TH) and mmol/

l (millimol per litre - international unit for the

hardness of water).

The softener should be adjusted according to

the hardness of the water in your area. Your

local Water Authority can advise you on the

hardness of the water in your area.