AlphaVision 16 Kullanıcı Kılavuzu - Sayfa 8

Kontrol Paneli AlphaVision 16 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AlphaVision 16 12 sayfaları.

and 2 digits of the year, for example 280495 to set the date on 28 april 1995. Finally press the <#> key.

F4# Adjust TIME

To adjust the time function 4 must be executed.

Push the keys <?> <4> <#> followed by a PIN-code of level 4 or 5.

The display shows the message:

Change time into

00:00 --> HH:MM

Enter current time: 2 digits for the number of hours (00 to 23) and 2 digits for the number of minutes (00

t/m 59). It is a so called 24-hour clock, the time "a quater past eight in the evening" will be entered as follows:

20:15. Finally press the <#> key.

All user-codes (PIN-codes) consist of 4, 5 or 6 digits.The number of digits of the user-code is standard 6, and is

programmable by the installer only. It is possible to program 98 PIN-codes. The 98th code is the PIN-code of the

systemmanager (mainoperator).

Programming and/or changing a PIN-code is done as follows:

Enter: <?> <6> <#> followed by a PIN-code of level 5.

On the LCD appears: "Enter number of user code: --". Enter the number of the PIN-code which has to be

changed (01 .. 98) or press <#> to change directly the first code. On the LCD appears for example:

01: 000000 lev 0

abcdefgh smtwtfs

On one screen all information about the PIN-code 01 can be read out. At the upper rule of the LCD, 01 indicates

that this is the information about the first PIN-code. The code itself consists of the digits 000000. This means, the

code is invalid. Further, lev 0 indicates that the level of this PIN-code is 0. abcdefgh indicates that the code, as

soon as it is programmed, will be valid for the sections A to H. Finally smtwtfs means that the PIN-code, as soon

as it is programmed, will be valid on Sunday to Saturday.

Notify the following: at this moment the code, level, sections and days are shown as small characters. If now key

> is pressed the information of the next code (in this case PIN-code 02) is given. If now key <

pressed, the information of the previous code will be given. This allows quick switching between all programmed

codes. This switching is not possible during programming a code. If a code is programmed, first the programming

must be completed before switching is possible.

Press <#> to begin changing of the programming of a PIN-code. The LCD shows:

01: ------ lev 0

abcdefgh smtwtfs

Enter the digits of a PIN-code (for example 111111) followed by <#>. The following text will appear on

the LCD:

01: 111111 lev -

abcdefgh smtwtfs

Enter now the desired level of the PIN-code (1,2,3,4 or 5, forexample 4) followed by <#>. Notify: the

sections will be shown as capitals:

User manual AlphaVision 16/96 *** 21 augustus 2003 ***

Page 8

> will be