Nikon F60D Kullanım Kılavuzu - Sayfa 10

Dijital Kamera Nikon F60D için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Nikon F60D 41 sayfaları.

Load Film

Use a DX-coded film. Film speed

is set automatically (ISO25-

5000).

When the camera is turned on,

film is loaded and the camera

back is closed, the film automat-

ically advances to the first frame.

Turn on the main switch, then open the camera back

and insert film.

• Insert from the bottom of the film cartridge.

Pull film leader out to red index mark.

• Do not insert the film leader beyond the red index mark.

• Hold the film cartridge and ensure film is properly positioned with no

slack.

y Check points

i Only DX-coded film can be used with this camera. When film other than

DX-coded film is inserted, T blinks and ﬂ appears on the LCD panel.

i Shutter curtains are very thin. Make sure not to touch the shutter

ISO (film

speed)

curtains with your finger or film leader.

i Film load can be confirmed on the LCD panel.

i When changing film outdoors, avoid direct sunlight.

Gently close the camera back until the lock release

snaps closed. Film automatically advances to first

frame.

• When T and 1 appear on the LCD panel, the film has advanced to the first

• When ‹ and T blink on the LCD panel, film is not properly installed.

• Film is automatically rewound when the film reaches the end of the roll.

• Number of available exposures of the film roll can be checked through the

frame.

Open the camera back again and reload film.

(See page 27.)

film cartridge confirmation window.

NOTE: Loading/removing film

Shutter curtains are very thin. Make sure

not to touch the shutter curtains with

your finger or film leader.