Nikon F60D Kullanım Kılavuzu - Sayfa 9

Dijital Kamera Nikon F60D için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Nikon F60D 41 sayfaları.

Mount Lens

Mount the lens to the camera

body.

Check the lens type.

CPU contacts of CPU

Nikkor lens

ŒCPU Nikkor lenses other than G-type (Illustration is D-type Nikkor lens),

with aperture ring

„G-type Nikkor lens, without aperture ring

Turn the main switch off and mount lens to the

camera body.

• Position lens in the camera's bayonet mount so that the mounting indexes

on lens and camera body are aligned, then twist lens counterclockwise

until it locks into place. (Be sure not to touch the lens release button.)

• When the lens is not attached or when a non-CPU lens is attached and

the main switch is turned on, ° blinks in the LCD panel and viewfinder

and the shutter cannot be released. (° does not blink and shutter can be

released when the exposure mode is set to manual.)

Œ CPU Nikkor lens

„ G-type Nikkor lens

other than G-type

y Check points

i Use D-or G-type AF Nikkor lens to utilize all the functions of this

camera. (See page 32 for Lens Compatibility.)

i Make sure to turn the main switch off when attaching/detaching the

lens.

i When attaching the lens, take care not to press the lens release button.

i When attaching/detaching the lens, make sure to avoid direct sunlight.

With CPU Nikkor lens with aperture ring (other than G-

type), set the lens' aperture to its minimum and lock.

• When CPU Nikkor lens other than G-type is not set to its minimum

aperture setting and the main switch is turned on, ‡ blinks in the LCD

panel and viewfinder and the shutter cannot be released.

• The G-type Nikkor lens has no aperture ring; aperture should be selected

from camera body. Unlike other CPU Nikkor lenses, aperture does not

need to be set to minimum.

Detaching the lens.

• Push and hold the lens release button, then turn the lens clockwise.

When camera is left unattended without lens

When you leave the camera unattended

without a lens attached, be sure to attach the

supplied body cap, or optional body cap

BF-1A. (BF-1 body cap cannot be used.)