Nikon Forestry Pro Kullanıcı Kılavuzu - Sayfa 4

Ölçüm Cihazları Nikon Forestry Pro için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Nikon Forestry Pro 48 sayfaları.
Ayrıca Nikon Forestry Pro için: Kullanım Kılavuzu (19 sayfalar)

Nikon Forestry Pro Kullanıcı Kılavuzu
Three-point measurement (height between two points)
(Measurement order: Ⅰ⇒Ⅱ⇒Ⅲ⇒Ⅳ⇒Ⅴ⇒Ⅵ⇒Ⅶ⇒Ⅷ⇒Ⅸ⇒Ⅱ , then repeat)
Internal display
Display when three-
point measurement
mode is selected.
This symbol indicates the display is blinking.
・ Power turns off 30 seconds after the last operation.
External display reading instructions
After the measurement of 1st target
point
.
24.4 Hor
(Actual external display image)
4
Press POWER
button to measure
Aiming at the
1st point.
Display of the vertical separation
(height between 2nd and 3rd points).
After the measurement of 2nd target point
Display of the vertical separation (height from
horizontal level to 2nd point).
24.4 Hor
3.4
Hgt (1)
7.8̊
Ang (1)
1st target point
2nd target point
3rd target point
Display of the horizontal
distance to the 1st point.
Press POWER
button to measure
Aiming at the 3rd
target point.
.
(Actual external display image)
When measuring 2nd and 3rd
points, please note that angles
should be between –75˚ and +75˚
from the horizontal level.
If measurement fails, the angle is
beyond ±75˚.
Press POWER
button to measure
Aiming at the 2nd
target point.
Display of the vertical
separation (height from
horizontal level to 2nd
After the measurement of 3rd target point
(Display of the vertical height between 2nd
and 3rd points.)
17.4
Hgt (2)
37.8̊
Ang (2)
(Actual external display image)
point).
.
En