AFX PAXW071828LAJD2xx Manuel - Sayfa 2

Dış Mekan Işığı AFX PAXW071828LAJD2xx için çevrimiçi göz atın veya pdf Manuel indirin. AFX PAXW071828LAJD2xx 2 sayfaları. Led outdoor sconce luminaires surface mount

Sayfayı Yazdır

LED Outdoor Sconce Luminaires

Surface Mount

120-277VAC / 60Hz

4. Fixture back pan mounting.

For

PAXW071223LAJD2xx,

(6).

For PAXW071828LAJD2xx, install fixture back pan (5) to mounting bracket (2) by aligning to two studs (3) then secure with two thumb nuts

(6). For additional support use two wood screws (10) on previously drilled holes or plastic anchors (11).

5. Diffuser installation.

Install diffuser (7) to the back pan (5) by aligning top and bottom holes then secure with two #8-32 screws (8).

6. For Wet Location Use:

Apply a small amount of silicone (not included) per manufacturer's instruction around screws (8) and around the diffuser (7) where it contacts

with the surface of the wall on top and two sides, but not on bottom.

7. Restore power at fuse or circuit breaker box.

Limited Factory Warranty

AFX Inc. hereby warranty that this fixture is free from defects in materials and workmanship when installed and used under normal operating conditions

for a period of 5 years from date of shipment from factory. This warranty covers all component parts and extends only to replacement of defective fixture

or components; it does not cover failure due to improper installation, misuse, mishandling, or damage incurred in transit.

Page 2 of 2

install fixture back pan (5) to mounting bracket (2) by aligning to two studs (3) then secure with two thumb nuts

Models # PAXW071223LAJD2xx

PAXW071828LAJD2xx

8061066 R2