3D Factories EASY 3D MAKER Kullanıcı Kılavuzu - Sayfa 12

3D Yazıcılar 3D Factories EASY 3D MAKER için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. 3D Factories EASY 3D MAKER 14 sayfaları.

9.5 VYJMUTÍ MODELU Z TISKÁRNY

For better access to print flat scroll to the bottom position. Using a knife or spatula peel first corner base layer

of the model, and then gradually podeberte and remove the entire model.

If there is to fuse the model to the motherboard and it is difficult to peel off the model it is possible to remove

the entire board for better access to the model. (after removal of the plates must be re-calibrate its height)

Loosen the screws plates, then loosen the set screw and pull together to release the ezámečků, then lift and

pull the plate side facing out from the machine.

VERSION: 1.9.2012

- 12 -