3D Factories EASY 3D MAKER Kullanıcı Kılavuzu - Sayfa 13

3D Yazıcılar 3D Factories EASY 3D MAKER için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. 3D Factories EASY 3D MAKER 14 sayfaları.

Sayfayı Yazdır
9
CLEANING AND MAINTENANCE
TH
O
UTER SHEATH PRINTER WITH A DRY CLOTH
XYZ
K
AXES
EEP CLEAN AND FREE FROM DUST
WITH A DRY CLOTH OR TOWEL SO THAT YOU GET RID OF DUST AND DIRT
I
N THE CASE OF IMPURITIES ON THE
.
DUST
P
RESS GENTLY CLEAN THE SURFACE MECHANICALLY
.
OTHER CHEMICALS
M
AKE SURE THAT ALL AXES ARE FREE OF SCRATCHES AND SCRAPES
A
LL MAINTENANCE PERFORMED ONLY WITH THE MACHINE TURNED OFF AND DISCONNECTED NETWORK ADAPTER
10.1 T
HE PRINTER DOES NOT PRINT
I
NVOLVED PRINTER MOVES BUT NONE COMES OUT OF THE NOZZLE MATERIAL
C
HECK OR PERFORM THE CLEANING NOZZLE
E
NSURE PROPER IMPLEMENTATION OF STRINGS
I
F STRING STUCK ON THE DRIVING WHEEL
. R
THE EXTRUDER
UBBED PART OF THE THREAD AND INSERT THE STRING AGAIN
.
WHEEL
10.2 T
HE PRINTOUT QUALITY IS NOT
VERSION: 1.9.2012
© AROJA, s.r.o. 2012
.
. XY
AXIS PERIODICALLY LUBRICATE WITH SILICONE OIL
Z
AXIS IN THE SAME WAY AS THE PREVIOUS PERSON OR A VACUUM CLEANER TO REMOVE
. V
ACUUM OR WIPE DUST CLOTH
C
7 F
7.1.2
HAPTER
IGURE
.
,
IT COULD CAUSE IT TO STOP LABORED AND
- 13 -
. S
CREWS AND GUIDE RODS
. D
O NOT USE THINNERS
.
.
F
10.1.1. P
IGURE
. A
,
LTERNATIVELY
. B
EFORE DELETING WIPE
Z
.
TREAT THE SAME WAY
,
SOLVENTS OR
ULL OR PULL LINE FROM
REMOVE AND CLEAN THE DRIVE