ARPEGE SECURITY TC-5500 Kullanım Kılavuzu - Sayfa 6
Kasa Sayacı ARPEGE SECURITY TC-5500 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. ARPEGE SECURITY TC-5500 10 sayfaları. Vacuum banknote counter
Sayfayı Yazdır※ The Free Function
Step 1: Press Free button, then the banknote gripper will be released
with alarm. The machine is ready for counting now.
Step 2: The maximum banknote capacity is approx. 200 pieces. Put the
banknotes on the banknote holder and make the banknote touch the
starting sensor.
Step 3: The machine will start counting automatically.
Step 4: The banknote gripper will release after counting process.
※ The Preset Function
Step 1: Press Preset button, then the banknote gripper will be
released with alarm. The machine is ready to count now. (The LED
display will show the number of "0" for starting the counting
processing).
Step 2: Select the preset number that you need and this preset number
will be showed on the LED display.
Step 3: Put the banknotes on the banknote holder and move them
forward to touch the starting sensor.
Step 4: The machine will start counting automatically. The counting
result should be the same as preset on the LED display.
Step 5: The banknote gripper will release automatically (wait about 3
sec) after this counting process if this operation is correct.
Step6: The buzzer will alarm when the counting number is less than
the preset number, user needs to press the button RESET to release
banknotes.
※ The Manual Function
Step 1: Press Manual button, then the banknote gripper will be
released with alarm. The machine is ready for counting now.
Step 2: Put the banknotes on the banknote holder and move them
forward.
Step 3: Press Manual button again to start the counting process.
Step 4: The counting number will be showed on the LED display after
this process.
※ The ACC & Clear Function
Step 1: Press Check, Free, Preset or Manual button to select
the counting mode.