array K Python KP52 Mark I Kullanıcı Kılavuzu - Sayfa 8

Konuşmacılar array K Python KP52 Mark I için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. array K Python KP52 Mark I 15 sayfaları.

KKP2-KP102

7. wIRING

KP52 and KP102 internal wiring is designed to pick up audio power signal from pins 1+ / 1- of a Speakon

NL4 connector. Pins 1+ and 1-, such as pins 2+ and 2-, are directly wired from one socket to the other,

so the two sockets are equivalent and can be used to connect the speaker to the amplifier or to connect

the speaker to another one driven in parallel by the same amplifier channel.

KP52 and KP102 features a switch which allows users to select the impedance of the speaker

(KP52: 8/32 Ω, KP102: 4/16 Ω).

The value to be selected depends mainly on the amplifier you use to drive the unit. Impedance must

be set to high (32 Ω for KP52 and 16 Ω for KP102) when speakers are driven by KMT active modules

or by the KA84 amplifier. Low impedance may be used when speakers are driven by a KA24 amplifier.

Please refer to your amplifier's specifications to select the correct speaker impedance for your

configuration.

KP52 @ 8

KP52 @ 32

KP102 @ 4

KP102 @ 16

IMPEDANCE SWITCH

KA24 amp

YES

COVERAGE SWITCH

KA84 amp

YES

Ver. 2.2

KMT sub

YES