Array Solutions Bandmaster III Manuel - Sayfa 15

Medya Dönüştürücü Array Solutions Bandmaster III için çevrimiçi göz atın veya pdf Manuel indirin. Array Solutions Bandmaster III 15 sayfaları. Universal band decoder

Sayfayı Yazdır

Default Antennas (Optional)

If you have more than one antenna on a

band the decoder gives you the ability to select

which antenna will be selected by default when

the 4-Wire Control Center software is not

running. Simply select which antenna you wish

as the default for that band. If only a single

antenna is available for a band leave the

setting at 1. Click on the Set button when

finished and the new settings will be stored in

the decoder.

This completes the configuration process. You may now close the decoder software

and start your logging program and connect to your radio.

Note: you can not run the Bandmaster III configuration application at the same time as a

logging/control program because you can not have two applications grabbing the same serial

port. Thus make certain your Bandmaster III configuration application if closed before running

any other application using your Bandmaster III.

Revision 1.5 November 21, 2011

P a g e

| 15