Array Solutions Bandmaster III Manuel - Sayfa 4
Medya Dönüştürücü Array Solutions Bandmaster III için çevrimiçi göz atın veya pdf Manuel indirin. Array Solutions Bandmaster III 15 sayfaları. Universal band decoder
Sayfayı Yazdır1 Physical description
The Bandmaster III is a fairly simple device. The front panel has a power LED and 12 LEDs
indicating the currently selected band. The back of the Bandmaster III has five connectors (figure
1 below) used for the various connections;
1. The Relay Output is a 25-pin D-sub connector used to connect the Bandmaster III to other
devices. A mating connector and shell are supplied with the unit.
2. The USB connector is used to connect the Bandmaster III to your computer.
3. The CI-V connector is a 1/8" phone jack used for Icom radios. When using any radio type
except Icom this connector will transmit a CI-V frequency data stream to allow automatic
band switching of Icom amplifiers (exception: The PW-1 will not work) and other Icom
accessories with non-Icom radios.
4. The Radio connector is a 9-pin D-sub male connector used to connect the Bandmaster III to
your radio (RS-232, TTL, BCD Band Data, etc).
5. The network connector is used to supply power to the Bandmaster III and the 4-Wireantenna
control network. The connector block has screw terminals for easy connection and is supplied
with the unit.
Revision 1.5 November 21, 2011
Figure 1 - Rear View
P a g e
| 4