3DR ArduCopter Quad-C Kullanıcı Kılavuzu - Sayfa 13

Dronlar 3DR ArduCopter Quad-C için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. 3DR ArduCopter Quad-C 19 sayfaları.

Wiring

1. Connect the three male bullets from the motors to the three bullet connectors on the

ESCs.

2. Repeat for all 4 motors.

3. Place the PDB in the center hole of the vehicle as shown in the picture above. and

fasten using four plastic M3 nuts.

PDB.

4. Connect the Deans plugs on the ESCs to the PDB.

is just so the motors can get power from the battery.

Note: Orient using the arrows on the top face of the

Note: the order does not matter, this