Akiyama CDJ-MP32 Kullanım Kılavuzu - Sayfa 6
CD Çalar Akiyama CDJ-MP32 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Akiyama CDJ-MP32 16 sayfaları. Professional
Sayfayı Yazdır- Allow for sufficient heat dispersion when installed on a rack.
- Handle the power cord carefully.
- Hold the plug when unplugging the cord.
- Keep the appliance free from moisture, water, and dust.
-Unplug the power cord when not using the appliance for long
periods of time.
-
Instant start within 10 msec (sound is produced immediately
when the PLAY button is pressed)
-
Auto cue function (-48dB)
-
Pitch range: +/- % +/- % +/-16%
4 ,
8 ,
-
Pitch bend: +/-16%
-
Pitch accuracy: +/-0,15 %
-
Pitch display
-
Selectable elapsed, remain and total remain time display
1. Precautions on handling compact discs.
- Do not allow fingerprints, oil or dust to get on the surface of the
disc.
- If the disc is dirty, wipe it off with a soft dry cloth.
- Do not use benzene, thinner, water, record spray, electrostatic-
proof chemicals, or silicone-treated cloths to clean discs.
- Always handle discs carefully to prevent damaging the surface;
in particular when removing a disc from its case or returning it.
- Do not bend the disc.
- Do not apply heat.
- Do not enlarge the hole in the center of the disc.
- Do not write on the label (printed side) with a hard-tipped
1. Checking the Contents
Check that the carton contains the following items:
1) Main unit
2) Control unit
3) Control cords
4) Pair of RCA pin cord.
5) Operating instruction (this booklet)
2. Installing the Uni
t
Mount the unit into your console or rack with 19" EIA rack rails.
CAUTION: The player will work normally when the main unit is
mounted with the front panel at within 15 degrees of the vertical
plane. If the unit is tilted excessively, discs may not be loaded or
unloaded properly.
The control panel's LCD's are designed to be clearly visible within the
angles. Mount the control unit so that the visual angle is within this
range.
0
15
Main unit
4
NOTE ON USAGE
FEATURES
HANDLING COMPACT DISCS
PREPARATIONS
6)AC power cord
7)8P cable right angle
Sight point
0
5
0
45
c d j - m p 3 2
-Do not obstruct the ventilation holes. (For units with ventilation
holes)
- Do not drop foreign objects into the unit.
- Do not let insecticides, benzene, and thinner come in contact with
the set.
- Never disassemble or modify the set in any way.
Single / continuous
-
Relay play allows consecutive playback during two decks
-
Frame search
-
4 fast search mode
-
S/PDIF digital audio RCAcoaxial
-
+ 10 track skip search
-
Fader start, Fader stop, Relay playback
-
Antishock
implement such as a pencil or ball point pen.
- Condensation will form if a disc is brought into a warm area from
a colder one, such as outdoors in winter. Do not attempt to dry the
disc with a hair dryer, etc..
2.
Precaution on storage
- After playing a disc, always unload it from the player.
- Always store the disc in the jewel case to protect from dirt or
damage.
- Do not place discs in the following areas:
- Areas exposed to directs sunlight for a considerable time.
-Areas subject to accumulation of dust or high humidity.
-Areas are affected by heat from indoor heaters, etc..
3.Connections
1) Turn off the POWER switch.
2) Connect the RCA pin cord to the input on your mixer.
3) Connect the control cords to the REMOTE connector on the
main unit.
CAUTION:
Be sure to use the supplied control cords. Using another type of
cable may result in damage.
Be sure the power is off when connecting the control cords.
Otherwise the units may not work properly.
4.Befpre Switching Off The Power
When you have finished using the CD player, before switching off the
power, be sure that the disc holder had been closed with the
OPEN/CLOSE button.
CAUTION:
Do not forcibly close the disc holder when the power is off.
POWER OFF
?
Do not switch off the power
when the disc holder is open.
POWER OFF
To avoid damage, please don't
switch off the power until"no
disc" or "time code" is showed on
the LCD after the disc holder has
been closed with the Open/Close
button.