Acoustical Systems AXIOM Kullanıcı El Kitabı - Sayfa 6
Aksesuarlar Acoustical Systems AXIOM için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Acoustical Systems AXIOM 16 sayfaları.
Sayfayı Yazdır
- 1. Table of Contents
- 2. Technical Features & General Design
- 3. Alignments
- 4. Unpacking the AXIOM
- 5. Mounting the AXIOM
- 6. Setting up the AXIOM
- 7. Balancing the AXIOM
- 8. Antiskating
- 9. Setting Vertical Tracking Force
- 10. Setting Horizontal Operation Point
- 11. Aligning the AXIOM
- 12. The Genuine Alignment Template
Technical features
& general design
The AXIOM is a 12" pivot tonearm featuring
double nano-gimbal bearings.
It can be operated in static balanced, full
dynamic balanced (with specific cartridges
only) and hybrid balanced mode.
The AXIOM is a full lateral balanced design.
The AXIOM features an unique compound arm
wand - a combination of surface hardened
Titanium and Carbon fiber pipes blocked
together and internally damped by an all new
design concept. A concept newer before applied
in tonearm design. Resulting in unmatched fast
energy transfer and total absence of any para-
sitic resonances in the tonearm itself.
The AXIOM was designed to explore the
possibilities of analog playback to the utmost
degree. To accomplish the best possible analog
playback performance, the AXIOM offers an
unique complete bundle of alignment options.
Alignments
Leveling the bearing axis
The AXIOM can be precisely leveled by
the user, independent from the turntable or
mounting surface.
SRA/VTA adjusted at the
cartridge
In the AXIOM the important alignment(s) of
VTA / SRA can be made right at the cartridge
– without altering the static parameters of the
tonearm, while preserving the other set align-
ments and leaving the arm wand always in
horizontal level.
Tracking force during play
Vertical tracking force can be set by static
means (adjust counterweight and/or trim weight
position relative to bearing point) as well as by
magnetic force.
It is possible to adjust VTF very precisely
during actual play. This is done by adjusting
the height of the magnetic counter bar in
relation to the back shaft of the AXIOM.
The optic nano spindle attending the
movement is so fine, that it takes 4 full
revolutions to move the magnetic bar
just 1 mm in height. It is possible to precisely
fine adjust tracking force/stylus pressure by
as little as 1/100 mN.
Dynamic anti-skating
Skating compensation – or anti-skating –
adjustment in the AXIOM is dynamic and
follows the tangential geometry of the AXIOM.
It too can be adjusted during play.
Tonearm height – VTA
Tonearm height can be adjusted on the main
VTA-tower of the AXIOM.
One full turn of the large top knob does adjust
height by precisely 1 mm.
Two (2) variants
The AXIOM is available in 2 standard variants.
u
with fixed standard
EIA ½" mounting slots
u
with SME-compliant
detachable headshell mount
In the SME-variant it is possible to adjust
overhang, effective length and azimuth even for
6