DJ-Tech uSolo Pro Kullanıcı Kılavuzu - Sayfa 11

MP3 Çalar DJ-Tech uSolo Pro için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DJ-Tech uSolo Pro 12 sayfaları. Professional usb

OPERATION INSTRUCTION

16. SYSTEM SETTING

Press and hold TIME button then press TIME or RATIO knob enter system setting.

Turn and press TIME or RATIO knob to enter item and confirm, press TIME button to leave mode.

1. Version .............. CON: VerXX( control version)

2. Sensitivity .......... ADJ.= -20~+20(Touch Wheel: sensitive adjustment)

3. Stop Time .......... 0.5~12.0 sec( LINE NAME: start run time adjustment for the Character display)

4. Run Time........... 50~2000 msec( LINE NME: move time adjustment for the Character display)

5. Pitch Bend ......... PitchRange, +/-1%~100%

6. Line Setup ......... MODE=1,2

MODE1.............. displaying folder name & IDTag3 information circularly repeated mode.

MODE2.............. displaying folder name once, then IDTag3 information circularly repeated mode.

7. Repeat Mode..... ON/OFF(Support only for tracks inside the same folder)

8. Bit rate ............... Disp ON

9. LOAD Defaults .. Enter Load(return to default value)

A. EXIT&SAVE...... Exit & Save setting to next power on. (Press SAVE TO button to express save the setting)

NOTE:

After setting, press MEMORY button to fast EXIT & SAVE; press TIME button to fast EXIT.

SAVE →PITCH ON/OFF, PITCH RANGE, SGL/CTN, AUTO CUE, TIME MODE, HOLD, KEY LOCK,

EFFECTS ON/OFF, Sensitivity, SLEEP/STOP/RUN TIME, Pitch Bend, Bit rate.

Defaults →PITCH (ON), PITCH RANGE (12%), (CTN), AUTO CUE (ON), TIME MODE (REMAIN), HOLD

(OFF), KEY LOCK (OFF), EFFECTS (OFF), Sensitivity (0), STOP (1.5sec) / RUN (400msec) TIME, Pitch

Bend(Pitch range), Bit rate(Disp ON), Repeat (OFF),Line Setup (MODE 1)

When touch sensor is abnormal;

Press and hold PITCH ON/OFF button and POWER ON.

It will show A/D value and don't touch WHEEL at this time.

Release the PITCH ON/OFF button and the value will be saved to memory

DSP: VerXX( DSP version)

Disp OFF

Return(exit without returning to default value)