Altronics Micron T 2162 Kullanım Kılavuzu - Sayfa 2

Elektrikli Alet Altronics Micron T 2162 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Altronics Micron T 2162 4 sayfaları. Starter kit

CAUTION:

DO NOT WORK ON LIVE CIRCUITS

•

Before working on any mains powered equipment, make sure that it is turned off, and the mains plug

is removed from the power point. You must not undertake work on live parts.

DO NOT USE IF DAMAGED

•

If the power lead becomes damaged or seems faulty, discontinue use immediately. Seek the

assistance of an authorised service technician at the place of purchase to fix anything damaged.

HIGH TEMPERATURES

•

Soldering irons operate at high temperatures and can easily burn the skin and/or objects. Do not

touch the tip and heater at any time and keep it a safe distance from inflammable materials while the

unit is on, or while cooling after switching off. Please allow a sufficient time for it to cool before

changing tips.

MAINTENANCE AND GENERAL CLEANING:

If supply cord is damaged in anyway it must be replaced immediately, to avoid a hazard. Only a service

agent or suitably qualified person must carry out this work.

The iron may be cleaned with a damp cloth using small amounts of liquid detergent. Never submerse the

iron in liquid or allow any liquid to penetrate the case.

HOW TO SOLDER:

File off any dirt, rust or paint on the part you wish to solder.

Heat the part with the soldering iron.

Apply rosin-based solder to the part and melt it with the soldering iron.

Note: When using non-rosin-based solder, be sure to apply a soldering paste to the part before

applying the solder.

Wait for the solder to cool and harden before moving the soldered part.

Micron T 2162 Soldering Iron Starter Kit

2 |

P a g e