Altura Photo GJ0120 Kullanıcı Kılavuzu - Sayfa 11

Kamera Aksesuarları Altura Photo GJ0120 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Altura Photo GJ0120 14 sayfaları. Dual wireless flash trigger set

Sayfayı Yazdır

1. Turn both the camera and receiver OFF.

2. Mount the receiver to the camera's hot shoe socket. Connect the shutter release cable

to the ACC2 socket of the receiver and to the remote socket on the camera body.

3. Set the channel switches to the same combination on both the receiver and transmitter.

(When using several camera units, make sure all receivers are set to the same channel

settings.)

4. Turn the camera ON and switch the receiver to "Camera" mode.

5. Press the button on the transmitter to conﬁrm interaction.

6. Half press the transmitter's button for autofocus and fully press for shutter release.

7. If the transmitter and receiver status lights turn red while the ﬂash trigger light turns on, all

settings are correct.