AluTeam BR 248-2 Montaj Talimatları Kılavuzu - Sayfa 12
Kamyonlar AluTeam BR 248-2 için çevrimiçi göz atın veya pdf Montaj Talimatları Kılavuzu indirin. AluTeam BR 248-2 12 sayfaları. Box body kits
Sayfayı Yazdır
7. Kit Contents
Series 248-2 Assembly Instructions
Please understand that we must reserve the right to make changes to
the design, features and technology delivered.
A BR248-2 kit includes:
o
Front wall assembly
o
2 x side wall assemblies (rh/lh) with mounted rear pillars
and, depending on features, with attached doors
o
Roof assembly with integrated frame crossmember incl. frame
gusset plate as well as preassembled roof corners
o
Optional rear steel frame, e.g. in kits with roller shutters
o
In case of liftgate kits: Top tailgate with pneumatic spring and
Mounting screws MD100058
o
Bottom frame crossmember, depending on the features
o
Assembly screw M 6 x 21 Tx30 self-locking,
AluTeam Article No.: MD100224
o
Pan head screws with flange for connecting the wall elements
to the roof from above, M 6 x 26, AluTeam No.: MD100318
as well as suitable ring seals
o
Ring seal MD 110044 for the assembly screw MD 100318
o
Screws M 12 x 45, MD100307 for connecting the aluminium
pillars to the bottom frame crossmember
o
2 x corner covers for the vertical front body inside corners
o
Depending on features, 2 x galvanised frame gusset plates, bolted
type, as corner connector for the integrated frame
o
If necessary, 2 pieces of cut foam for the cavity between the front wall
and the side wall
o
Plugs for bolting holes in the frame pillars
o
Avinox blind rivet Ø 4.8 x 11.3 VA Article No.: MD150023
o
Countersunk screw M 10 x 30 galv., MD 100268 Connection of
aluminium pillars to top frame crossmember
o
If necessary, cover for the bottom rails, side and front
o
If necessary, handle
o
Depending on the features, rear side lights (see circuit diagram)
o
If necessary, side marking lights with a connection kit
o
If applicable, a connection cable for truck chassis as stated in the
purchase order (see circuit diagram)
o
Sealants, white and grey (stainless steel frame)
o
Pretreatment agent, cleaner, activator
o
Paper towels
o
Sticker with body number
o
Optional sticker "Tested load security"
Attention: The sticker is only valid with a certificate issued by AluTeam
o
Assembly Instructions
Dated 11/2021
Previous instructions become invalid.
12 / 12