ARTROMOT K3 Servis Kılavuzu - Sayfa 4
Fitness Ekipmanları ARTROMOT K3 için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. ARTROMOT K3 13 sayfaları.
Ayrıca ARTROMOT K3 için: Servis Kılavuzu (12 sayfalar)
Sayfayı Yazdır4. Packing and unpacking
The following settings has to be made to transport the device
correct:
The first step is to move the device in a position of
EXTENSION = 0 degrees.
Switch off the device. Remove the power adapter, power cord
and put it into the specified cutouts of the styrofoam.
Loosen the two knurled handles (Pos. 6.2), pull out the
ankle joint (Pos. 4.x).
For transportation, use the original packaging.
Move the two styrofoam parts on the device.
Put the hand-held programming unit into the specified cutout
of the styrofoam.
Put the device with the styrofoam parts in the carton.
Move the tubes of the ankle joint upside down into the
specified cutouts of the styrofoam.
Put separate pads around the foot plate and frame to protect
the device against vibration and damage.
5. Block diagram of
electronic parts
Display
Controller for
Hand-held
programming unit
K3 motor control
Power adapter
4
Tubes of the
ankle joint
Power adapter
Hand-held programming unit
adjustment
Power
cord
Knee