ALVEO3D ALVEOPRO - M100 Kullanım Kılavuzu - Sayfa 3

3D Yazıcılar ALVEO3D ALVEOPRO - M100 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. ALVEO3D ALVEOPRO - M100 20 sayfaları. Filtering system for 3d printer - hepa14 & active carbon

Sayfayı Yazdır

SAFETY

Read all instructions before using

3D printer enclosures contain harmful emissions from 3D

printing. It is advised to always turn the filtering system on

during the printing process.

The filtering system is powered by a high-pressure fan. Do not

turn on the fan before full assembly is done with the protective

grid and the P3D filter. Failure to comply with this instruction

can cause injuries.

Please use recommended electrical voltages to power electronic

board, as indicated in the assembly instructions to prevent

damage.

Do not touch the electronic board in operation.

Before each print, make sure the extensible hose is well

connected to both connectors from AlveoPRO top cover and

enclosure panel.

Filter operational range 0-60°C max