Ashly MX-406 Kullanım Kılavuzu - Sayfa 3

Müzik Mikseri Ashly MX-406 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Ashly MX-406 16 sayfaları. Stereo microphone/line mixer
Ayrıca Ashly MX-406 için: Kullanım Kılavuzu (12 sayfalar), Teknik Notlar & Özellikler (2 sayfalar), Kullanım Kılavuzu (12 sayfalar), Kullanım Kılavuzu (12 sayfalar)

Sayfayı Yazdır

The lightning flash with arrowhead

symbol, within an equilateral triangle, is

intended to alert the user to the presence

of uninsulated "dangerous volt age"

within the product's enclosure that may be

of sufficient magnitude to constitute a risk

of electric shock to persons.

THIS APPARATUS MUST BE EARTHED

1. INTRODUCTION

Congratulations on your purchase of an Ashly

MX-406 stereo mic/line mixer, a professional, studio qual-

ity solution to everday mixing needs. MX-406 features

include six channels of mic or line inputs with mic input

pad, TRS insert points, and +48V phantom power. Each

channel has up to 60dB input gain, separate treble and

bass controls, an aux send control, level, and a stereo pan

control. An aux input is provided for a stereo program

source such as tape or CD. Outputs include aux master,

stereo line out (pre-master), stereo left and right, trans-

former balanced mono out, and stereo headphones. A

full 11 segment LED array indicates stereo output level.

Stereo main outputs use 1/4" jacks, stereo aux

input and line out use RCA connectors, and a transformer

isolated 600 ohm mono output uses an XLR connector.

Ashly mixers still use professional quality 16mm metal

shaft potentiometers for greater accuracy and long life

and of course, Ashly products come with a worry-free five

year warranty.

2. UNPACKING

As a part of our system of quality control, every

Ashly product is carefully inspected before leaving the

factory to ensure flawless appearance. After unpacking,

please inspect for any physical damage. Save the ship-

ping carton and all packing materials , as they were care-

fully designed to reduce to minimum the possibility of

Operating Manual - MX-406 Stereo Microphone/Line Mixer

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT RE-

MOVE COVER. NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK,

DO NOT EXPOSE THIS APPlIANCE TO RAIN OR MOISTURE.

TO REDUCE THE RISK OF FIRE, REPLACE ONLY WITH

SAME TYPE FUSE. REFER REPLACEMENT TO QUALIFIED

SERVICE PERSONNEL.

WARNING:

The exclamation point within an eqilateral

triangle is intended to alert the user to the

presence of import ant operating and

maintenance instructions in the literature

accompanying the device.

transportation damage should the unit again require pack-

ing and shipping. In the event that damage has occurred,

immediately notify your dealer so that a written claim to

cover the damages can be initiated.

The right to any claim against a public carrier

can be forfeited if the carrier is not notified promptly and

if the shipping carton and packing materials are not avail-

able for inspection by the carrier. Save all packing mate-

rials until the claim has been settled.

3. AC POWER REQUIREMENTS

The MX-406 mixer will perform normally from

93 to 125 volts AC, 50-60Hz (some export models are

wired for 240 Volts and are labeled accordingly). Use

only properly grounded AC receptacles. To reduce the

risk of ground loop hum, use a central point for system

AC power distribution. In the event of fuse failure, refer

this unit to a qualified service technician for fuse replace-

ment using only the same type fuse. Power consumption

is less than 20 watts.