AERMEC PCO5 Kullanıcı Kılavuzu - Sayfa 6

Kontrol Paneli AERMEC PCO5 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AERMEC PCO5 20 sayfaları.

2.3 SETTING A NUMERICAL VALUE FOR A PARAMETER

Many parameters (e.g. the seasonal operating set-points) require the user to enter

a numerical value. In these cases, proceed as follows:

1. Once you have accessed a page containing an editable numerical value (e.g.

the operating set-points), press on the value already displayed.

2. A numerical keypad will now appear, where you can enter a new value;

3. Press "Enter" on the keypad to confirm and apply the new value, or press "Esc"

to delete the operation.

Once you have selected the numerical value to be modified, the nu-

merical keypad will show the Minimum and Maximum values that

can be set for that parameter.

Certain parameters (such as the operating mode) require the user to choose an op-

tion from a list. In these cases, proceed as follows:

1. Once you have accessed a page containing an editable value (e.g. the operat-

ing mode), press on the option already displayed;

2. A small window will now appear, with a list of options;

3. Select one of the options by pressing on it. Your choice will be highlighted by

a change of colour;

4. Press "OK" to apply the chosen option, or press "Cancel" to quit the selection

page without altering the previous value;

COOLING

HEATING

BY TEMP.OUTDOOR

BY DIGITAL INPUT

BY SUPERVISOR