Asko T731 Kullanım ve Bakım Kılavuzu - Sayfa 15

Kurutucu Asko T731 için çevrimiçi göz atın veya pdf Kullanım ve Bakım Kılavuzu indirin. Asko T731 20 sayfaları. User manual use & care guide fr
Ayrıca Asko T731 için: Hızlı Başlangıç Kılavuzu (2 sayfalar), Planlama ve Tasarım Kılavuzu (19 sayfalar), Kullanım ve Bakım Kılavuzu (20 sayfalar), (İspanyolca) Kullanım ve Bakım Kılavuzu (20 sayfalar), (Fransızca) Manual D'utilisation Et D'entretien (20 sayfalar)

ERROR MESSAGES

Error messages will display on the LED if a fault occurs

while a program is in progress. The table below deﬁnes

each possible error message. If the message still displays

MESSAGE

ERROR

Call a service technician.

There may have been a power outage. Check the breaker box and fuses.

The dryer is programmed to stop after a maximum of 3 hours drying time. If it has run this long,

let it cool and try to start the program again.

Try turning the power off then on again. If the message remains, call a service technician.

This indicates a thermistor fault. Call a service technician.

This indicates the overheat protection device has activated. Clean the lint ﬁlter and try running

the program again.

This indicates a fault in the moisture sensor. Running a dry program with dry clothes or an empty

machine could also cause this error. Try opening the door. If the message remains, call a service

technician.

after you have checked the possible solutions, call a

service technician.

Page 15