Asko TD70 Kullanıcı Talimatları - Sayfa 12

Kurutucu Asko TD70 için çevrimiçi göz atın veya pdf Kullanıcı Talimatları indirin. Asko TD70 16 sayfaları. Tumble dryers

ELECTRICAL FEATURES TD 77A

General design

TD 77A is a condensing tumble dryer , which incorporate a microprocessor for

process control, and pushbutton selection of programs. The pushbutton panel also

carries LEDs and two-digit 7-segments displays which indicate selected time (for

times programs), time-delayed starts etc.

Electrical supply

The machines are supplied as 3-phase, 230V, 10A, heater power 2850W . They

can also be reconnected internally to suit them for a single-phase, heater power

2850W , 16A or single-phase. Heater power 1900W, 10A.

Programcontrol

Control unit

The control unit has a microprocessor for control of the motor, heater, program etc.

Keyboard

The keyboard includes pushbuttons and indicators.

Main On/Off switch

The main On/Off switch is fitted in the centre of the lower edge of the panel, is a 2-

pole switch and disconnects the phase and the zero-line.

Indicating lamp

The indicating lamp shows that the main switch is turned on.

Door switch

The door operates a door-switch that, when open, interrups the program. If the

door has been opened while the machine is running, and then closed again, the

machine must be restarted by the Start pushbutton.

Drive motor

The main drive motor is at the bottom of the machine, driving the drum and the two

fans that circulate internal air and external air.

Condensate pump

The machine includes a pump to pump condensated water from the lower con-

tainer to an upper container behind the control panel.

Heater

TD 77 A: The maximum heating power is 2850W provided by two heaters with

ratings of 1900W and 950W respectively, so that the machine can be reconnected

to provide a reduced heating power of 1900W.

TD 77