ACR Electronics RCL-50B Ürün Destek Kılavuzu - Sayfa 7
Taşkın Işık ACR Electronics RCL-50B için çevrimiçi göz atın veya pdf Ürün Destek Kılavuzu indirin. ACR Electronics RCL-50B 19 sayfaları. Remote control searchlight master controller point pad
· Press the ON/OFF button to turn the lights ON or OFF.
· Press the SPEED button to toggle between High and Low rotation speeds.
· Press the Right or Left Arrows to rotate the Searchlight in that direction.
· Press the Up or Down Arrows to raise or lower the Searchlight-beam.
· To activate the XRCiZ feature, press and hold the ON/OFF button for greater than 5 seconds.
The Green LED indicates XRCiZ feature is enabled.
· To deactivate the XRCiZ feature, Press and hold the ON/OFF button for greater than 5
seconds. The Red LED indicates XRCiZ feature is disabled.
· An LED blinking Red / Green indicates that the XRCiZ feature is now "exercising" the
Searchlight.
NOTE: XRCiZ Feature is only available when paired with a URC-102 Master Controller.
URP-102 Point Pad Functions
FIGURE 3: URP-102 POINT PAD™ FUNCTIONS
5
Y1-03-0141 Rev. B