ACR Electronics Mini B300 2766.6 Ürün Destek Kılavuzu - Sayfa 8
Güvenlik Sistemi ACR Electronics Mini B300 2766.6 için çevrimiçi göz atın veya pdf Ürün Destek Kılavuzu indirin. ACR Electronics Mini B300 2766.6 9 sayfaları. Class b
emergency position
indicating radio beacon (epirb) etsi and fcc approved
Ayrıca ACR Electronics Mini B300 2766.6 için: Ürün Destek Kılavuzu (13 sayfalar), Ürün Destek Kılavuzu (6 sayfalar)
Sayfayı Yazdır
4.2
Battery Check
1. The battery expiry date should always be placed on the battery and the outside of the
Beacon case. See 2.2 Battery Installation. Replace the battery immediately after extended
use or emergency and always on or before the battery expiry date. Use only a 6 volt Lithium
Duracell DL223A (or equivalent) battery.
2. Safety Precautions:
Warning: To avoid possible fire, explosion, leakage or burn hazard, do not open, recharge,
disassemble, heat above 71°C (160°F) or incinerate.
4.3
Inspection Check
The following checks should be made during the periodic servicing:
1. Check the antenna tip and telescoping sections for any signs of damage or corrosion.
2. Check the plastic covered portion of the antenna for any signs of chafing, wear, cracks, or
other damage, and signs of resultant corrosion beneath the covering.
3. Check the antenna socket at the cap surface for any sign of looseness or corrosion.
4. Check the Beacon housing for signs of damage or mishandling. Dents, or damage to the top
end could result in an operational malfunction during an emergency.
5. Check the lanyards for chafing, fraying or any damage. Check the lanyard anchor points for
chafing. Resecure the lanyards and check the knots for tightness.
6. Rinse the outside of the unit with fresh water frequently to remove any salt build-up on case
or exposed parts.
7
Y1-03-0136 Rev. C