ASL INTERCOM 1200300071 Інструкція з настінного монтажу - Сторінка 4

Переглянути онлайн або завантажити pdf Інструкція з настінного монтажу для Підсилювач ASL INTERCOM 1200300071. ASL INTERCOM 1200300071 16 сторінок.

Друкувати сторінку
2
2.
Secure the back box to the wall-mount frame using the 6 x M6 nuts and washers (A).
Always ensure that adequate ventilation is provided for the equipment.
Do not block side or front vents and do not obstruct air flow behind enclosure.
Ensure that all swarf is removed from back box.
3.
Secure the Electronics Module to the wall-mount frame using 4 M6 nuts and washers (B).
4.
Secure the Battery Tray to the back box using the 6 x M8 hex head screws and washers (C).
1) Take care to not trap any cabling.
2) Ensure that the 6 x M8 hex head screws are fully tightened so that all the battery weight is
held by the wall-mounting frame and fixings, not by the back box.
3) The back box is not designed to support the battery weight.
Plain washer
M6 Nut
Shakeproof
washer
M8 Hex Head
Screw
Shakeproof
washer
Ensure you refer to the full INTEGRA Installation Guide for correct installation of the mains supply, field
wiring, optional items (if any) and batteries.
For all user documentation please go to www.asl-control.co.uk/downloads or scan the QR code on
page 1.
U-0732-0142 (M0732_31) – Issue 01
INTEGRA Products - Wall-Mount Instructions
Installing the Back Box with Electronics Module Fitted
A
B
A
B
A
Application Solutions (Safety and Security) Limited
C
C
C
A
B
A
B
A
C
C
C
Page 4 of 16