Acer AL713 Посібник - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник для Монітор Acer AL713. Acer AL713 10 сторінок. 17" (43 cm)
Також для Acer AL713: Посібник користувача (13 сторінок), Посібник користувача (9 сторінок)
Друкувати сторінку
Connecting the AC Power
1.
Connect the power cord to the LCD Monitor.(Se Fig. 1-6)
2.
Connect the power cord to an AC power source.
Connecting the Audio Cable
(For AL712/AL716)
1.
Connect the audio cable to the " LINE OUT " jack on your PC's
audio card or to the front panel's "AUDIO OUT" jack of your
CD ROM drive. (See Fig. 1-7)
2.
Connect the other end of the audio cable to the LCD Monitor's "
LINE IN " jack.
Setting Up the LCD Monitor
1.
Turn on the LCD monitor's hard power switch, located on the
back of the monitor
2.
Turn on the LCD Monitor's soft power switch, located on the
bezel of the monitor.
Power Management System
This LCD Monitor complies with the VESA DPMS (version 1.0) Power Management guidelines. The VESA DPMS provides
four power saving modes through detecting a horizontal or vertical sync. signal.
When the LCD Monitor is in power saving mode, the monitor screen will be blank and the power LED indicator
will light yellow.
Chapter 2 Display Controls
User Controls
A brief description and the location of all LCD Monitor function controls and indicators:
Stereo Speakers
1
(AL712/AL716)
Speaker Volume Control
2
(AL712/AL716)
3
Soft Power Switch
4
DC Power-On Indicator
5
Function Select Buttons
e
PC Audio Stereo output.
Increase Volume - Turn knob clockwise.
Decrease Volume - Turn knob counter clockwise
Press the soft power switch to switch the monitor ON/OFF.
LED lights Green color --- Power is ON.
LED lights Yellow --- Monitor is in "Power Saving Mode".
LED is off --- Power is OFF.
Press either left or right control button for OSD (On Screen
Display) menu selection.
4
Figure 2-1
Figure 1-6
Figure 1-7
Figure 1-8