Air Mellotron Посібник користувача - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник користувача для Музичне обладнання Air Mellotron. Air Mellotron 9 сторінок.
Parameter
Delay
Time
Feedback
Reso LP Freq
Reso Bell Freq Center frequency for feedback resonance.
Reso Bell Gain Amount of gain applied to the resonant frequency.
L/R Ratio
Mix
Spring Reverb
Pre-Delay
Time
Lo Cut
Diffusion
Width
Mix
Description
Click the button next to the effect name to enable or
disable delay.
Amount of time between the dry signal and the
delayed signal.
Amount of signal fed back into the delay line.
Low pass frequency for feedback resonance.
Reduces the delay Time in either the Left or Right
stereo field. This is useful for creating offset, panned
delays.
Wet/dry amount of the delay effect.
Click the button next to the effect name to enable or
disable spring reverb.
Length of time between dry signal and reverberated
signal.
Length of reverb tail.
Center frequency for reverb signal low-cut filter.
Rate of increasing density of reverb reflections.
At lower settings, the sound of individual reflections is
more present.
At higher settings, reflections are more uniform.
Stereo width of reverb signal. Higher values give wider
stereo separation.
Wet/dry amount of the reverb effect.
Value Range
Off, On
1/16 – 16/4
0–100%
100 – 16000 Hz
100 – 16000 Hz
0–100%
50:100 – 100:100 –
100:50
0–100%
Off, On
0 – 250 ms
1.00 – 10.00 s
20 – 1000 Hz
0–100%
0–100%
0–100%
8