Amerlux GRUV - 1.5 - GB-LED Інструкція з монтажу Посібник з монтажу - Сторінка 5

Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Освітлювальне обладнання Amerlux GRUV - 1.5 - GB-LED. Amerlux GRUV - 1.5 - GB-LED 6 сторінок.

Друкувати сторінку
AMERLUX
LIGHTING SOLUTIONS
GRUV1.5-GB -LED - WALL/CEILING CORNER INSTALLATION (U-PATTERN)
Gyp Board
WARNING - RISK OF FIRE AND ELECTRICAL SHOCK. FIXTURE MUST BE INSTALLED BY A QUALIFIED ELECTRICIAN
ONLY. FIXTURE IS INTENDED FOR INSTALLATION IN ACCORDANCE WITH THE NATIONAL ELECTRICAL CODE, LOCAL
AND FEDERAL SPECIFICATIONS. DISCONNECT POWER AT ELECTRICAL PANEL BEFORE SERVICING .
Wall/Ceiling Corner Installation - "U" Pattern
HORIZONTAL
VERTICAL
LENGTH
SIDE COVERS (2)
SCREWS (4)
VERTICAL
FIXTURE
Amerlux, LLC. - 178 Bauer Drive, Oakland NJ 07436 - T: 973-882-5010 - F: 973-882-2605
R
ADAPT. ABILITY.
RETAIN THESE INSTRUCTIONS FOR MAINTENANCE REFERENCE.
LENGTH
L-PATTERN
1. Repeat steps 1-3 from L-Pattern Installation
sheet on page 4.
2. Once the fixture is secure, feed power source
through the knock-out.
Splice to harness according to code
3. Continue installing rest of Horizontal fixtures.
4. Install Horizontal fixture closest to corner.
A. Tighten screw to the Top Bracket. Slide Top
Bracket to wall and tighten optional self-drill
screws if necessary.
5. Install Vertical fixture closest to corner.
A. Remove Side Covers.
B. Mount fixture so top edge of extrusion on the vertical fixture
is flush with horizontal fixture. (Overlap min. of
Reference layout drawing for location.
C. Re-Install Side Covers
D. Remove Side Covers if max overlap is exceeded.
E. Secure fixtures following instructions from pages 1-3.
www.amerlux.com
INSTALLATION INSTRUCTIONS
TM
SHEET #:
689-0512 (5 of 5)
VERTICAL
LENGTH
6. * Install wall (By Others)
7. Spackle in fixture.
8. Remove SHIPPING BRACE.
9. Snap-in LENS.
SPEC. SHEET
REFERENCE:
SCREW, 8-32 X 1/4
TOP (SLIDING) BRACKET
OPTIONAL SELF-DRILL SCREWS (2)
1
", max. 2
4
HORIZONTAL
FIXTURE
1
")
4