Amerlux GRUV - 1.5 - GB-LED Інструкція з монтажу Посібник з монтажу - Сторінка 6
Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Освітлювальне обладнання Amerlux GRUV - 1.5 - GB-LED. Amerlux GRUV - 1.5 - GB-LED 6 сторінок.
Друкувати сторінкуAMERLUX
LIGHTING SOLUTIONS
GRUVM - EX - GB - LED
Gyp Board
WARNING - RISK OF FIRE AND ELECTRICAL SHOCK. FIXTURE MUST BE INSTALLED BY A QUALIFIED ELECTRICIAN
ONLY. FIXTURE IS INTENDED FOR INSTALLATION IN ACCORDANCE WITH THE NATIONAL ELECTRICAL CODE, LOCAL
AND FEDERAL SPECIFICATIONS. DISCONNECT POWER AT ELECTRICAL PANEL BEFORE SERVICING .
RETAIN THESE INSTRUCTIONS FOR MAINTENANCE REFERENCE.
Additional feed (if required)
1. Cut off harness
connector
2. Remove hole plug or
knock-out.
3. Pass harness wires
through feed hole.
4. Splice harness wires to
feed connector wires using
wirenuts (by others).
5. Install feed connector.
Amerlux, LLC. - 178 Bauer Drive, Oakland NJ 07436 - T: 973-882-5010 - F: 973-882-2605
INSTALLATION INSTRUCTIONS
R
ADAPT. ABILITY.
TM
SHEET #:
HARNESS
CONNECTOR
FEED CONNECTOR
www.amerlux.com
689-0424 (6 of 6)
HOLE PLUG
(BY OTHERS)
WIRENUTS
(BY OTHERS)
SPEC. SHEET
REFERENCE: