Canon 1211B002 - DR 1210C Посібник з легкого старту - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник з легкого старту для Сканер Canon 1211B002 - DR 1210C. Canon 1211B002 - DR 1210C 2 сторінки. Document scanner
Друкувати сторінку
☞
Continued from front side
6.
Read the software license
agreement, and click [Yes] if you
consent to the conditions of the
software.
7.
Installation of the scanner driver
starts.
8.
After the scanner driver is installed,
installation of the job tools starts.
9.
Click [Finish] to complete the
installation.
10.
Next the installation wizard for
CapturePerfect 3.0 appears.
11.
Click [Next].
12.
Read the software license
agreement, and click [Yes] if you
consent to the conditions of the
software.
13.
Check the destination folder and
click [Next].
14.
Installation of CapturePerfect 3.0
starts.
15.
Click [Finish] to complete the
installation of CapturePerfect 3.0.
16.
Next, installation of OmniPage SE 4
and Presto! BizCard 5 SE starts.
Follow the messages on the screen
to proceed with the installation.
17.
This completes the installation.
18.
Click [Exit] to exit the installer.
Click [Back] to return to the menu
screen.
Step 4. Connecting the Scanner to Your PC
Perform the following steps to connect the power cord and USB cable, and
connect the scanner to your PC.
Warning
❏
Use only the AC adapter included in the package.
❏
Connect the DR-1210C to your computer while the DR-1210C is turned OFF.
❏
Be sure to log on with administrator privileges when logging on to Windows.
1.
Check that the ADF (Automatic Document Feeder) connector, located
in the center of the back side of the scanner, is fully inserted.
2.
Plug the AC adapter into the connector located to the right of the
ADF connector ( 1 ).
3.
Remove the protective cap from the power plug and insert it into a
power outlet ( 2 ).
4.
Connect the USB cable to the scanner and the computer ( 3 ).
To PC
5.
Check the scanner and computer connections, and press the
power button to turn the scanner ON.
When the scanner is turned ON, the power indicator lights, and
the display panel shows "Ready".
Display Panel
Important!
When the icon changes as
Power
shown above, this indicates that
Indicator
a communications error has
occurred with the computer.
Check the scanner and
Power
Button
computer connections.
6.
Windows recognizes the Canon DR-1210C USB as a new device.
7.
The driver is installed by the following procedure depending on the
version of Windows you are using.
●
If the OS is Windows 2000,
installation starts, and the "Digital
Signature Not Found" message is
displayed. Clicking [Yes] resumes
installation of the driver, and
installation ends automatically.
●
If the OS is Windows XP, the "Found
New Hardware Wizard" is displayed.
1. On the Windows Update search
screen, select [No, not this time],
and click [Next]. (This screen is
not displayed for Windows XP
service pack 1.)
2. Select [Install the software
automatically (Recommended)]
and click [Next].
3. The Hardware Installation screen
is displayed. The "This driver
has not passed the Windows
Logo Test" message is
displayed. Click [Continue
Anyway] to continue the
installation.
4. When the Completing the Found
New Hardware Wizard screen
appears, click [Finish] to finish
installation.
Step 5. Scanning
When you have finished installing the software and the scanner has been
recognized, you can scan a document. Perform the following steps to test that
your document is scanned properly.
1.
Thoroughly fan the pages of your
documents.
2.
Place your original into the feeder, and
adjust the document guide adapter to
fit the size of your documents.
Document Guide
Adapter
3.
Press [FILE].
Scanning starts, and "Scanning" is
displayed on the display panel.
Scanning···
4.
When "Sending complete" is
displayed on the display panel,
[FILE] button
this indicates the scanning has
ended.
Sending complete.
Note
●
Image files scanned by pressing [FILE] are saved in the [My
Pictures] folder in [My Documents]. (Default)
●
Image files are saved according to the default settings as PDF
files with a 17-digit file name. This file name indicates the date
and time that the image was saved.
●
Images scanned by pressing [COPY] are printed out on the
printer set as the default printer in Windows.
●
Pressing [E-MAIL] starts up the e-mail software, and attaches
the scanned image file to a new message.
●
You can change the scan settings by using the Job Registration
Tool registered in the [Programs] menu.
This setup is now complete
●
This completes setup of the DR-1210C. Details on how to use the
DR-1210C are described in the User's Guide packaged with the
DR-1210C. Before you start using the Scanner, be sure to thoroughly
read the User's Guide.
For details on how to use CapturePerfect 3.0, refer to the
●
"CapturePerfect Operation Guide" or the online Help included on
the CD-ROM.
Display Panel