Canon DV Nerwork Інструкція з експлуатації - Сторінка 22

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Програмне забезпечення Canon DV Nerwork. Canon DV Nerwork 40 сторінок. Version 2

Connecting the Camcorder to a Computer

If your camcorder is equipped with the NETWORK mode, you can use a DV cable or

a USB cable to connect your camcorder to the computer. If your computer is not

equipped with the NETWORK mode, use the DV cable.

❍ Make sure to install the DV Network Software before connecting the

camcorder to the computer.

❍ Make sure the camcorder is being powered by the compact power adapter

before connecting it to a computer.

❍ Do not connect any devices to the camcorder's DV terminal when

connecting the camcorder to the computer using the USB terminal.

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

Attach the supplied USB cable to the computer's USB port and the

camcorder's USB Terminal.

• Refer to your computer manual for the location of the computer's USB ports.

• See your camcorder instruction manual for connecting instructions.

❍ Make sure to install the DV Network Software before connecting the

camcorder to the computer.

❍ Make sure the camcorder is being powered by the compact power adapter

before connecting it to a computer.

❍ Do not connect any devices to the camcorder's USB terminal when

connecting the camcorder to the computer using the DV terminal.

Attach the DV cable to the computer's IEEE1394 terminal and the

camcorder's DV terminal.

• Refer to your computer manual for the location of the computer's IEEE1394

terminal.

• See your camcorder's instruction manual for connecting instructions.