Canon EOS 5D Mark II Процедури оновлення прошивки - Сторінка 2

Переглянути онлайн або завантажити pdf Процедури оновлення прошивки для Програмне забезпечення Canon EOS 5D Mark II. Canon EOS 5D Mark II 6 сторінок. Firmware ver. 1.1. new feature
Також для Canon EOS 5D Mark II: Кишеньковий посібник (2 сторінок), Кишеньковий посібник (2 сторінок), Інструкція з експлуатації (19 сторінок), Посібник з експлуатації (39 сторінок), Посібник з експлуатації (36 сторінок), Технічні характеристики (2 сторінок), Брошура (24 сторінок), Буклет (2 сторінок)

Firmware Update Procedures

In the following instructions, "X.X.X " or "x.x.x" indicates either the current firmware version or the firmware

version for the update.

(1) Format the CF Card

Be sure to carefully review the contents of the CF card before

formatting.

Insert the CF card into the camera, and turn the Power Switch <ON>.

Press the <MENU> button.

Rotate the Main Dial and the Quick Control Dial to select the [Format]

item, and press the <SET> button.

Rotate the Quick Control Dial to select the [OK], and press the <SET>

button.

Turn the camera <OFF> and remove the CF card from the camera.

(2) Download the firmware update file from the Web page.

Please download the compressed, self-extracting file that matches your

computer's operating system.

Extract the contents of the downloaded file to create the firmware

update file. (*1)

Confirm the file size of the firmware update file. (*2)

If the file size differs, please download the file again from the Web site.

The name of the firmware update file is "5d200xxx.fir". ("xxx" will be

different for each firmware version.)

The name and size of the firmware update file can be checked on the

Web site.

(*1)The way to extract the contents of the downloaded file.

Windows

Double-click the downloaded file.

Clicking [OK] will cause the file's contents to be extracted and the

firmware update file to be created.

Macintosh

The downloaded file will automatically self-extract, creating the

firmware update file.

In the case the downloaded file do not automatically self-extract,

double-click the downloaded file.

(*2)The way to confirm the file size.

Windows

Right-click the icon of the firmware update file and select the

[Properties] command from the pop-up menu that appears.

Macintosh

Select the icon of the firmware update file, and then select the [Get Info]

command from the [File] menu.